How to Set Up Bitmain ANTRACK V1: A Complete Step-by-Step Installation Guide
  • Posted On : Sep 06,2025
  • Category : Crypto Mining

The world of cryptocurrency mining has evolved far beyond the early days of small rigs and improvised cooling setups. As the demand for higher hash rates and efficient energy usage grows, so does the need for advanced mining infrastructure. One of the latest solutions from Bitmain, the ANTRACK V1 Hydro-Cooling Cabinet, has quickly become a go-to option for professional miners and industrial-scale mining farms.

This powerhouse is capable of hosting up to four Antminer S19 or S21 Hydro miners, delivering a maximum load of 24 kW while keeping everything running cool and stable. But setting it up requires precision, the right environment, and proper maintenance routines.

In this blog, we’ll walk through everything you need to know from unboxing to full operation to get your Bitmain ANTRACK V1 up and running.

Why the ANTRACK V1 Is a Game-Changer

  • Optimized Cooling: Traditional air-cooled ASIC miners often struggle in large-scale environments. The ANTRACK V1 integrates hydro-cooling, keeping your hardware at peak performance.
  • Space Efficiency: With its vertical rack design, it saves valuable floor space in crowded data centers.
  • Reliability: Built from industrial-grade materials and designed with fluid management, the system reduces overheating risks and extends miner lifespan.
  • Scalability: You can run multiple cabinets side by side, creating a modular mining farm.

If you’re planning to grow your mining operations, investing in an ANTRACK V1 is a step toward long-term stability.

Step 1: Unpacking and Inspection

Your ANTRACK V1 will arrive in a packaged weight of ~310 kg, so be prepared with the proper equipment (like a forklift or heavy-duty pallet jack) to handle it safely. 

When unpacking:

  • Check all external surfaces for dents, scratches, or damages.
  • Verify that accessories such as hoses, connectors, and manuals are included.
  • If anything is missing or damaged, contact your vendor immediately before installation.

This step may seem simple, but ensuring that your equipment arrives in perfect condition saves you from future headaches.

Step 2: Preparing the Installation Area

A hydro-cooling cabinet is not something you set up in your living room—it requires a carefully controlled environment.

  • Space & Clearance: The unit measures approximately 600 mm × 2000 mm × 1000 mm. Leave at least 1 m of clearance around it for airflow and service access.
  • Floor Strength: At ~205 kg bare weight (before miners and fluid), ensure your flooring can handle it.
  • Temperature & Humidity: Keep the room temperature between 15–45 °C and humidity at 10–90% (non-condensing).
  • Power Availability: A three-phase 380–415 VAC, 50–60 Hz electrical supply is mandatory.

A well-prepared space ensures smooth installation and optimal long-term operation.

Step 3: Electrical Setup

Safety first!

  • Confirm your site’s three-phase power supply is correctly wired and grounded.
  • The ANTRACK V1 can draw up to 80 A, so consult a qualified electrician to handle the connection.
  • Keep the power switch OFF during all connections.

This step is non-negotiable. A poor electrical setup can damage both your cabinet and miners, not to mention create serious safety hazards.

Step 4: Cooling System Configuration

The cooling system is the heart of the ANTRACK V1. If it’s not set up correctly, your miners won’t last long.

  • Cooling Fluid: Use 10% antifreeze solution or deionized water (pH 7.8–9.5).
  • Flow Rate: Maintain 32–40 L/min with pressure ≤ 3.5 bar.
  • Replacement Cycle:

Pure water: every 1–2 months

Antifreeze or inhibitor solution: every 6–12 months

  • Conductivity Monitoring: Replace immediately if above 100 µS/cm.

Bitmain designed this system with reliability in mind, but like any hydro setup, neglecting maintenance can lead to leaks, pump damage, or even miner failures.


Step 5: Installing Miners

Now comes the exciting part, adding your miners.

  1. Securely mount up to 4 Antminer S19 or S21 Hydro miners in the designated slots.
  2. Connect each miner’s cooling pipes to the cabinet’s loop.
  3. Check that seals and clamps are properly tightened.
  4. Connect the miners’ power cables to the ANTRACK’s power distribution unit.

Double-check everything before powering on—leaks or loose cables can cause costly problems.


Step 6: Network Setup

  • Connect the ANTRACK V1 to your local network via RJ45 Ethernet (10/100 Mbps).
  • Ensure that miners are properly assigned IP addresses.
  • Access each miner’s web interface to configure mining pools, wallet addresses, and worker names.

Networking is straightforward but essential. Without a stable internet connection, your mining operation is dead in the water.

Step 7: First Power-Up and Diagnostics

With everything connected, it’s time to start the system.

  1. Turn on the ANTRACK V1 power switch.
  2. Verify the pump and fans are running smoothly.
  3. Ensure water is circulating at the correct flow and pressure.
  4. Boot up each miner individually and check for errors.
  5. Run a stress test for several hours while monitoring temperature, power usage, and network stability.

If all goes well, congratulations—you’re officially running a hydro-cooled mining setup!

Maintenance Checklist

Keeping the ANTRACK V1 in top condition requires regular attention. Here’s a simple checklist:

✅ Check cooling fluid levels weekly

✅ Inspect for leaks every few days

✅ Replace fluid as per manufacturer’s guidelines

✅ Clean filters and hoses monthly

✅ Monitor conductivity and pH of water regularly

✅ Log miner performance to identify anomalies early

Preventive maintenance not only saves money—it prevents downtime, which can be devastating in the mining industry.

Troubleshooting Common Issues

Overheating: Usually caused by low fluid levels or poor flow. Refill and bleed air from the system.

Network Errors: Check Ethernet cables, router ports, or miner IP conflicts.

Unstable Hashrate: Could be due to incorrect pool settings or unstable power supply.

Leaks: Inspect all joints, replace damaged hoses, and tighten fittings.

Conclusion

The Bitmain ANTRACK V1 isn’t just another mining accessory—it’s a complete hydro-cooling ecosystem built for serious miners. From improved thermal management to scalability and reliability, it offers everything you need to run ASIC miners at their full potential.

Yes, the setup requires precision and careful planning, but the payoff is worth it. With the right installation, regular maintenance, and careful monitoring, the ANTRACK V1 can keep your mining operation running efficiently for years.


If you’re looking to scale up your Bitcoin mining operations and ensure hardware longevity, the ANTRACK V1 is one of the best investments you can make today.